- 追加された行はこの色です。
- 削除された行はこの色です。
* もくじ [#u631eb8d]
#contents
Cent OS7 でおえかきマシンを構築するよ.
なるべく参考にしたページのアドレスを併記するようにしたいと思いますが,
漏れがあったらごめんなさい.
** 部品選定 [#tcbd76bb]
お予算は10万円前後で.
| CPU | i7-4790 | 84w | | 35151 | LGA1150 |
| | i7-4790s | 65w | 36480 | | awstat |
| mother | GA-H97-HD3 | H97 | 9028 | | |
| | | DDR3x4 | | | |
| | | PCIe x16 x2 | | | |
| | | PCIe x4 x1 | | | |
| | | PCIe x1 x2 | | | |
| | | PCI x2 | | | |
| | | SPDIF out | | | |
| | GA-H97-D3H | H97 | | | |
| | | DDR3x4 | | | |
| | | PCIe x16 x1 | | | |
| | | PCIe x4 x1 | | | |
| | | PCIe x1 x2 | | | |
| | | PCI x3 | | | |
| | | SPDIF out | | | |
| | GA-Z97X-SLI | Z97 | | 11556 | 限定数完売 |
| | | DDR3x4 | | | |
| | | SPDIF out | | | |
| | | PCIe x16 x1 | | | |
| | | PCIe x8 x1 | | | |
| | | PCIe x1 x3 | | | |
| | | PCI x2 | | | |
| | GA-Z97X-UD3H | Z97 | | 15223 | |
| mem | AD3U1600W8G11-2 | DDR3 | 13871 | | |
| | | 1600 8Gx2 | | | |
| SSD | Intel SSD 730 SSDSC2BP240G4R5 | 240G | | 19426 | |
| | Intel SSD 530 SSDSC2BW240A401 | 240G | 20352 | | |
| case | coolmaster | 横置き | 8480 | | tsukumo |
| | Elite 361 RC-361-KKN1-JP | | | | |
| | 幅 150mm x | | | | |
| | 奥行き 368mm x | | | | |
| | 高さ 464mm | | | | |
| | CPU クーラーの高さ:122mm まで | | | | |
| | ビデオカードの長さ: | | | | |
| | 227mm まで(HDD ケージ搭載時) | | | | |
| | 312mm まで(HDD ケージ取り外し時) | | | | |
| | 前部:80mm ファン x 1(オプション) | | | | |
| | 後部:80mm ファン x 2(オプション) | | | | |
| | 上部:120mm ファン x 1 | | | | |
| | (90mm ファン x 1または | | | | |
| | 80mm ファン x 1 に換装可能) | | | | |
| | 左側面:120mm ファン x 1 | | | | |
| | または 90mm ファン x 1または | | | | |
| | 80mm ファン x 1(オプション) | | | | |
| | SilverStone SST-GD10B | 横置き | | 13912 | |
| | Grandia SST-GD08B | 横置き | | 21060 | |
| power | SF-500P14FG | ファンレス | 11556 | | |
| | | 500W | | | |
| cpu cooler | CoolMaster Xdream i117 | | | 2297 | |
| | CoolMaster Vortex Plus | H83.5mm | 2993 | | |
| | RR-VTPS-28PK-R2 | | | | |
| case fan | DEEPCOOL Xfan 80 | | 191 | | |
| case fan | DEEPCOOL Xfan 80 | | 191 | | |
| snd | | | | | |
| 合計 | | | 103142 | | |
備考(選定基準とか):
- CPU: 低消費電力にしたのは,趣味です.
- mother: やっぱりギガバイ子!
- mem: ふだんは店頭で最も安いの!ですが,ちょっと奮発してADATAにしました.今回,おかいものに行く時間なくて全て通販で済ませてしまったのですが,通販だと謎の不安感があって,保守的になるです...
- SSD: Intelコンシューマ向けは現行2ライン(7xxと5xx).なんか7xxの方が耐久度高そう,みたいな情報を見かけた気がしたので.
- case: 横置きにしたかったのです.しかしながら,横置きはハイエンド指向のが多くて嗜好に合わないなぁ..と思っていたのですが,Coolermasterのがあったので.
- power: 電源も,いままではとにかく安いの一択!だったのですが,やっぱし実物見てないと保守的に..なりすぎた結果,結構高価なものを買ってしまった..
** selinux [#b74e90d4]
/etc/sysconfig/selinux
** xfce [#o20b87c6]
yum install epel-release.noarch
/etc/yum.conf
group_package_types=default,mandatory
yum --enablerepo=epel groups install Xfce
yum groups install "X Window System"
$ startxfce4
で起動確認
yum install gdm
ランレベル変更
$ sudo systemctl set-default graphical.target
** theme [#xc3c71e5]
http://xfce-look.org/content/show.php/Win3x?content=169112
169112-win3x.tar.gz
/usr/share/themes
にコピー
settings -> window manager
で変更
https://www.xfce-look.org/p/1012363/
https://sourceforge.net/projects/classic95-p/
/usr/share/icons
にコピー
settings -> 外観
で変更
** ログアウト時にセッションを保存しない [#s2de384d]
settings -> セッションと起動
これだけだったか自信がない...
** 英字配列 [#h97440f5]
/etc/vconsole.conf
KEYPAM="us"
** wget [#kca046e9]
$ sudo yum install wget
** vivaldi [#sfe55c9d]
wget https://vivaldi.com/download/Vivaldi_TP3.1.0.162.9-1.x86_64.rpm
$ sudo yum install lsb
音声が再生されないときは,とりあえず''/usr/bin/pulseaudio''をKILL.
以下は影響なしでした.
vivaldi --alsa-output-device=hw:1,1 --alsa-fixed-output-sample-rate=44100
sudo ln -s /usr/bin/xfce4-terminal /usr/bin/terminal
しんだとき
$ ps aux | grep vivaldi | sort | head -n 1 | sed 's/ \+/ /g' | cut -d' ' -f2
あと,XcreenSaverかなにかを依存関係で追加したけど,忘れてしまいました..
不足ファイルについては
yum provides "*.so"
のようにして,提供パッケージを確認.
** terminal [#t0015744]
xfce4-terminal
sudo ln -s /usr/bin/xfce4-terminal /usr/bin/terminal
** cifs [#d1b1384a]
動作確認
sudo mount.cifs \\\\10.0.0.1\\storage \
/mnt/storage -o user=kosame
オートマウント
fstab:
//10.0.0.1/storage /mnt/storage/ cifs username=user,password=* 0 0
** unzip [#c81865a6]
$ sudo yum install unzip
** uim [#l753239b]
uimのskkが使いたいのです
''yum localinstall'' で以下をインストール
uim-1.8.6-6.fc22.x86_64.rpm
uim-gtk2-1.8.6-6.fc22.x86_64.rpm
eb-4.4.3-3.fc22.i686.rpm
libskk-1.0.2-1.fc22.x86_64.rpm
sudo yum install gtk2*
sudo yum install gtk3*
ひさしぶりに実施したら以下も必要と言われたけど,
rpmforgeのリンクが切れてる...
libgcroots.so.0
とおもったら,URLをftp->httpに変更したらいけた.
libgcroots-0.2.38.fc22.x86_64
uim-skk-1.8.6-6.fc22.x86_64
その他ちゅういじこう
- xim関連: gtk2-immodule-uim
- uim-xim が動作しているか
- XMODIFIERSとかの環境変数
export GTK_IM_MODULE="uim"
export QT_IM_MODULE="uim"
export XMODIFIERS="@im=uim"
** uim設定 [#l6827d08]
''settings'' -> ''セッションと起動'' -> ''自動開始アプリケーション''で,
以下を追加
name: uim
desc: uim
command:
/usr/bin/imsettings-switch uim.conf
もひとつ追加
name: uim-toolbar
desc: uim-toolbar
command: /usr/bin/uim-toolbar-gtk
"入力メソッドのスターター"は無効にしておく.
** ibus-skk [#u7229bb6]
いつごろからかわからないけど,Vivaldiでuim-skkから日本語の入力ができなくなってしまいました..
(現:1.13.1008.40)
しょーがないので,ibus-skkに変更します.
1. ひつようなパッケージのインストール
sudo yum install "Input Methods"
2. 環境変数設定
export GTK_IM_MODULE="ibus"
export XMODIFIERS=@im="ibus"
export QT_IM_MODULE="ibus"
3. デーモンの起動設定
Menu -> 設定 -> セッションと起動 -> 自動開始アプリケーション -> 追加
ibus-daemon -rdx
# --replace
# --daemonize
# --xim (execute ibus XIM server.)
4. 設定
ibus-setup -> 入力メソッド -> 入力メソッドの選択 -> 日本語
("日本語"の部分にカーソルを合わせたままにしておくと,
右側にkkcなどの候補があらわれる.ちょっとわかりにくかった.)
5.そのほか
ibusを起動していると,emacsのskkと,Ctrl-jがコンフリクトするのか,
emacsのskkでCtrl-jで確定できなくなった.
Ctrl-Mで確定できるけど,めどい..
6.やっぱりSKKが使いたい
sudo yum localinstall libskk-1.0.2-6.fc27.x86_64.rpm
sudo yum localinstall ibus-skk-1.4.2-5.fc26.x86_64.rpm
7.stickyにしたい
参考
https://uwabami.junkhub.org/log/20141025.html
ちょっとパスを修正
/usr/share/libskk/rules/
できた!わーい.
** caps->ctrl [#r7335c75]
''settings'' -> ''セッションと起動'' -> ''自動開始アプリケーション''
で以下を追加
name: CapsLock2Ctrl
desc: CapsLock2Ctrl
command: /usr/bin/setxkbmap -option -option 'ctrl:nocaps'
しかし,上記だとemacsでshiftも押されたみたいになっちゃう(表現しにくい..)&
コンソールで有効でないので以下をためしてみる.
http://lambdalisue.hatenablog.com/entry/2013/09/27/212118
sudo mkdir -p /usr/share/keymaps
sudo dumpkeys | head -1 | sudo tee /usr/share/keymaps/Caps2Ctrl.map
以下を追加する
keycode 58 = Control # CapsLock act as Ctrl
## keycode 29 = Caps_Lock # Ctrl act as CapsLock
## alt_is_meta # Fix the Alt key
/etc/systemd/system
sudo touch caps2ctrl.service
[Unit]
Type=simple
Description=Caps2Ctrl
After=network.target
[Service]
ExecStart=/usr/bin/loadkeys /usr/share/keymaps/Caps2Ctrl.map
[Install]
WantedBy=multi-user.target
http://tire-retire.blogspot.jp/2014/12/centos7rclocal.html
有効化
# systemctl enable caps2ctrl.service
開始
# systemctl start caps2ctrl.service
上記に加えて,xでの対応が必要なのですが,'' ~/.xmodmaprc'' などを
使用した手法が,どうもうまくいかないのです..
スクリプトの起動はしているようなので,そのあとにuimが起動した際,
設定がちゃらになっていると予想しました.
そこで実験として,''自動開始アプリケーション''に,uim関連のプロセスが起動しきるのを
待ったあとで,xmodmapを実行するスクリプトを追加してみました.
結果として,期待どおり''CapsLock''->''Ctrl''が実現できました.
とりあえず所望のことが実現できたので,あまり考察はしてませんが...
なお,以下のスクリプトの ps で grep した結果の数の確認を,
3より大きいかどうかで判定しているのは,uim関連のプロセスと思われるものがが3つあったからです.
(起動後に''ps aux | grep -i uim'' で調べただけですが..)
ついでに,GUIログイン直後にCapcLockを連打していると
Capsが有効になった瞬間にコマンドが実行されて,
ひどい目にあったりします(CapsLockが解除できなくなる..)
以下を作って,''Settings'' -> ''セッションと起動''にスクリプトを登録しました.
chmod +x もわすれずに.
http://www.yukun.info/blog/2008/01/shell-script-kill-process.html
~/xmodmapAfterUim.sh
#!/usr/bin/sh
inter=2 #
wait=5 #
while true
do
isAliveSev=`ps aux | grep "uim" |
grep -v grep | wc -l`
if [ $isAliveSev -gt 3 ]; then
echo "uim alive"
xmodmap ~/.xmodmap
exit
else
echo "no uim"
fi
sleep $inter
done
あと,変換もCtrlにする場合(keycode 100)
remove Lock = Caps_Lock
keysym Caps_Lock = Control_L
keycode 100 = Control_R
add Control = Control_L Control_R
** emacs [#j6f34070]
emacs-24.5.tar.xz
patch-bgex_20150515_0-emacs-24.5.tar.xz
特に問題なくパッチがあたりました.
./configure --prefix=/opt/emacs-25.2 --with-x-toolkit=gtk
make
sudo make install
ほそく
libXaw-devel
libjpeg-turbo-devel
libpng-devel
gifflib-devel
libtiff-devel
ncurses-devel
*** ddskk [#ua6a545a]
make what-where EMACS=/opt/emacs-24.5/bin/emacs-24.5
make install EMACS=/opt/emacs-24.5/bin/emacs-24.5
*** w3m [#gafa1c4b]
cvs版 -> autoconf
./configure --with-emacs=/opt/emacs-24.5/bin/emacs-24.5
$ ./configure --with-emacs=/opt/emacs-25.2/bin/emacs \
--with-lispdir=/opt/emacs-25.2/share/emacs/25.2/site-lisp
checking for /opt/emacs-25.2/bin/emacs... /opt/emacs-25.2/bin/emacs
checking what a flavor does /opt/emacs-25.2/bin/emacs have... Emacs 25.2
checking prefix for /opt/emacs-25.2/bin/emacs... /opt/emacs-25.2
checking where lisp files should go... /opt/emacs-25.2/share/emacs/25.2/site-lisp/
checking where icon files should go... $(prefix)/share/emacs/25.2/etc/images/w3m
** リポジトリ追加_nux-dextop,rpmforge [#sb9d096e]
sudo yum localinstall http://li.nux.ro/download/nux/dextop/el7/x86_64/nux-dextop-release-0-1.el7.nux.noarch.rpm
sudo yum localinstall http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.3-1.el7.rf.x86_64.rpm
** optsndout [#n9f0e03d]
$ sudo yum install pulseaudio
$ sudo yum install alsa-plugins-pulseaudio
** mixer [#tdbc80de]
xfce4-mixer
SPDIFから出力したいと思います.
まず,''cat /proc/asound/cards''でカード番号を確認
次に,''/etc/asound.conf''に以下を追記.
pcm.!default {
type hw
card 1
device 0
}
参考 http://alsa.opensrc.org/DigitalOut
aplay -L
の出力を眺めるのも楽しいです.
** flash install, vlc [#jd2bdb02]
http://ufuso.jp/wp/?p=15419
yum -y --enablerepo=rpmforge install flash-plugin
** vlc [#b4cf25aa]
''ツール'' -> ''設定'' -> ''オーディオ''で,''出力モジュール : ALSAオーディオ出力''
を選択します.
''使用可能な場合,S/PDIFを使用''を有効化します.
デバイスは,S/PDIFを選択します.
** global [#n15c8560]
global-6.2.12-4.fc21.x86_64.rpm
** mewインストール [#ee81731e]
sudo yum install autoconf stunnel cvs
どっとこんふぃぎゃー
./configure --prefix=/opt/emacs-24.5/ \
--with-emacs=/opt/emacs-24.5/bin/emacs \
--with-elispdir=/opt/emacs-24.5/share/emacs/site-lisp \
--with-etcdir=/opt/emacs-24.5/share/emacs/24.5/etc \
--localstatedir=/opt/emacs-24.5/var \
--infodir=/opt/emacs-24.5/share/info \
--mandir=/opt/emacs-24.5/share/man
けっか
***************************
Mew configuration results
***************************
use emacs : /opt/emacs-24.5/bin/emacs
elisp files should go : /opt/emacs-24.5/share/emacs/site-lisp/
etc files should go : /opt/emacs-24.5/share/emacs/24.5/etc
exec files should go : /opt/emacs-24.5/bin
info files should go : /opt/emacs-24.5/share/info
man files should go : /opt/emacs-24.5/share/man/man1
** xclock [#b585b9f6]
yum install xclock
xclock -bg gray -fg white -hd white -padding 0 -render -geometry 80x80+1920-0
** コマンドでディスプレイをスタンバイにしたい [#x60731e5]
http://www.xmisao.com/2014/02/17/how-to-pub-screen-into-standby-on-linux.html
sleep 2; xset dpms force standby
ターミナルで実行する場合sleepを入れないと,(おそらく)xsetを入力したときの
キー入力(RET)に反応してしまって,ディスプレイがOFF->ONとなってしまいました.
** ThinkPad USB トラックポイントキーボード [#nb80dc0f]
http://www.mazn.net/blog/2012/07/01/778.html
** スキャナ(GT-S630) [#gd2dddce]
https://wiki.archlinuxjp.org/index.php/Sane
- yumでいれる
sudo yum install xsane xsane-common xsane-gimp
sudo yum install sane-backends-drivers-scanners
- epsonのサイトでひろう
http://download.ebz.epson.net/dsc/search/01/search/searchModule
iscan-2.30.1-1.usb0.1.ltdl7.x86_64.rpm
iscan-data-1.36.0-1.noarch.rpm
esci-interpreter-perfection-v330-0.2.0-1.x86_64.rpm
- 動作確認
$ scanimage -L
device `epkowa:interpreter:003:007' is a Epson (unknown model) flatbed scanner
モデル名が"unknown model"となっていますが,
''sudo scanimage -L''したら正しく表示されました.
$ sudo scanimage -L
device `epkowa:interpreter:003:007' is a Epson GT-S630 flatbed scanner
USBを挿抜したところ,一般ユーザーでもモデル名が表示されるようになりました.
その状態で'xsane'コマンドを実行したところ,期待通り動作しました.
** Intuos 4 [#a4cbed68]
Intuos4のホイールは誤爆しやすいわりに使う機会が少ないので無効にします.
# xsetwacom --version
0.23.0
# xsetwacom set "Wacom Intuos4 6x9 pad" AbsWheelDown "0"
# xsetwacom set "Wacom Intuos4 6x9 pad" AbsWheelUp "0"
# xsetwacom set "Wacom Intuos4 6x9 pad" AbsWheel2Down "0"
# xsetwacom set "Wacom Intuos4 6x9 pad" AbsWheel2Up "0"
- "0" の部分を"off"としている記述も見掛けましたが,自分の環境ですと"Cannot parse keyword 'off' at position 1"と表示され,値が更新されませんでした.
- AbsWheelDown と, AbsWheel2Down の違いがよくわかりませんでした(とりあえず両方とも無効に).
- はじめに,"マウスとタッチパッド"の設定(GUI)で"Wacom Intuos4 6x9 pad"のみを無効("このデバイスを有効にする"のチェックを外す)にしたのですが,GIMPでスタイラスも無効になってしまうので,上記の方法をとりました.
動作確認して意図通り動作したら,下記で自動化...しようと思ったけど反映されない...
# cat /etc/X11/xorg.conf.d/52-wacom-options.conf
Section "InputClass"
Identifier "Wacom Intuos4 6x9 pad options"
MatchDriver "wacom"
MatchProduct "pad"
# Setting up buttons
Option "AbsWheelUp" "+0 "
Option "AbsWheelDown" "+0 "
Option "AbsWheel2Up" "+0 "
Option "AbsWheel2Down" "+0 "
EndSection
** 特定のUSBデバイスだけ、スリープからの復帰を無効にする [#ec8672b3]
kosame@mizore /etc/udev/rules.d
$ cat 80-pm.rules
ACTION=="add", SUBSYSTEM=="usb", \
ATTRS{idVendor}=="045e", \
ATTRS{idProduct}=="07b2", \
ATTR{power/wakeup}="disabled", \
RUN+="/bin/sh -c 'echo disabled > /sys$env{DEVPATH}/../../power/wakeup'"
やりたいこと:キーボードでスタンバイから復帰して,マウスでは復帰しない.
(参考)最初にヒットしたのは下記の方法でした.
su -
echo EHC1 > /proc/acpi/wakeup
この方法だと,コントローラ単位でしか制御できないのでキーボードもマウスも,両方同時に無効になってしまう..
追記:
/var/log/messages みたら,以下のメッセージが残ってたので,RUN+... は不要っぽい
Oct 14 23:01:55 mizore systemd-udevd: error opening ATTR{/sys/devices/(中略)/wakeup} for writing:
No such file or directory
Oct 14 23:01:55 mizore systemd-udevd: error opening ATTR{/sys/devices/(中略)/wakeup} for writing:
No such file or directory
Oct 14 23:01:55 mizore systemd-udevd: error opening ATTR{/sys/devices/(中略)/wakeup} for writing:
No such file or directory
→なくても、期待通り動作した.
** ショートカット?とか [#b204d456]
デフォルトの''.bash_profile''によって''~/bin''にパスが通っている。
~/bin以下にリンクを作っておけば,Alt+F2したときに拾ってくれる
~/bin/emacs -> /opt/emacs-24.5/bin/emacs
~/bin/terminal -> /usr/bin/xfce4-terminal
** バッテリ充電閾値の設定@x201 [#s9c2a3b3]
おおむね以下のとおり.本家より使い勝手がよい...
http://www.thinkwiki.org/wiki/Tp_smapi
https://github.com/evgeni/tp_smapi
# tar xzvf tp_smapi-0.40.tgz
# cd tp_smapi-0.40
てすと
# make load
# echo 60 > /sys/devices/platform/smapi/BAT0/start_charge_thresh
# echo 70 > /sys/devices/platform/smapi/BAT0/stop_charge_thresh
# echo 60 > /sys/devices/platform/smapi/BAT1/start_charge_thresh
# echo 70 > /sys/devices/platform/smapi/BAT1/stop_charge_thresh
うまくいったので本番
# make install
あとこれも
/etc/modules-load.d/tp_smapi.conf
thinkpad_ec
tp_smapi
yum install sysfsutils
/etc/sysfs.conf
devices/platform/smapi/BAT0/start_charge_thresh = 60
devices/platform/smapi/BAT0/stop_charge_thresh = 75
devices/platform/smapi/BAT1/start_charge_thresh = 60
devices/platform/smapi/BAT1/stop_charge_thresh = 75
*** X270 [#e20d0078]
https://github.com/teleshoes/tpacpi-bat
modprobeするタイミングで"Required key not available"とでたら,
いけないことと思いつつ
BIOS->Security->Secure Boot->Secure Boot->Disable とする。
sudo ./install.pl
[kosame@hotaru systemd_fixed_threshold]$ cat /usr/lib/systemd/system/tpacpi.service
[Unit]
Description=sets battery thresholds
[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=/usr/bin/tpacpi-bat -s ST 0 60
ExecStart=/usr/bin/tpacpi-bat -s SP 0 75
[Install]
WantedBy=multi-user.target
[kosame@hotaru ~]$ sudo systemctl enable tpacpi.service
Created symlink from /etc/systemd/system/multi-user.target.wants/tpacpi.service to
/usr/lib/systemd/system/tpacpi.service.
[kosame@hotaru ~]$ sudo systemctl start tpacpi.service
** 無線の電源を切る [#q542dd4d]
以下より
gnome-control-center
gnome-bluetooth
** plugin [#rd637e60]
- xfce4-cpugraph-plugin
- xfce4-cpufreq-plugin
- xfce4-systemload-plugin
** その他 [#uf2bdd56]
[[Fedoraにっき]]
- usbutils
lsusbするのに必要
AbsWheelDown
** スリープから復帰したときにTrackPointが反応しない@X270 [#bb9c3691]
xinput --disable 6 ; xinput --enable 6
** TrackPoint [#me018f33]
[kosame@hotaru xorg.conf.d]$ ls
0-layout.conf 00-keyboard.conf 20-thinkpad.conf 60-trackpoint.conf
[kosame@hotaru xorg.conf.d]$ cat 0-layout.conf
Section "ServerLayout"
Identifier "X270TrackPoint"
InputDevice "TrackPoint"
EndSection
[kosame@hotaru xorg.conf.d]$ cat 20-thinkpad.conf
Section "InputClass"
Identifier "Trackpoint Wheel Emulation"
MatchProduct "TPPS/2 IBM TrackPoint|DualPoint Stick|Synaptics Inc. Composite TouchPad /
TrackPoint|ThinkPad USB Keyboard with TrackPoint|USB Trackpoint pointing device|Composite TouchPad /
TrackPoint"
awstat MatchDevicePath "/dev/input/event*"
Option "EmulateWheel" "true"
Option "EmulateWheelButton" "2"
Option "Emulate3Buttons" "false"
Option "XAxisMapping" "6 7"
Option "YAxisMapping" "4 5"
EndSection
[kosame@hotaru xorg.conf.d]$ cat 60-trackpoint.conf
Section "InputDevice"
Identifier "TrackPoint"
Driver "evdev"
Option "Device" "/dev/input/event12"
Option "EmulateWheel" "true"
Option "EmulateWheelTimeOut" "200"
Option "EmulateWheelButton" "2"
Option "Emulate3Buttons" "false"
Option "XAxisMappint" "6 7"
Option "YAxisMappint" "4 5"
EndSection
[kosame@hotaru X11]$ cat xorg.conf
Section "InputClass"
Identifier "Trackpoint Wheel Emulation"
MatchProduct "TPPS/2 IBM TrackPoint|DualPoint Stick|Synaptics Inc. Composite TouchPad / TrackPoint"
MatchDevicePath "/dev/input/event*"
Option "EmulateWheel" "true"
Option "EmulateWheelButton" "2"
Option "Emulate3Buttons" "false"
Option "XAxisMapping" "6 7"
Option "YAxisMapping" "4 5"
EndSection
** ぷろんぷと [#z31f2afa]
$ echo $PS1
\[\e]0;\w\a\]\n\[\e[32m\]\u@\h \[\e[33m\]\w\[\e[0m\]\n\$
* トラブルシューティング [#ge1d155e]
** 音声が途切れる [#z3d95f0e]
途切れた際に,サスペンドほにゃほにゃというメッセージを残す.
$ aplay -D hw:1,1 01_hoge.wav
再生中 WAVE '01_hoge.wav' : Signed 16 bit Little Endian, レート 44100 Hz, ステレオ
サスペンド中です。レジュームします。失敗しました。ストリームを再スタートします。終了
$ aplay -D hw:1,1 01_hoge.wav
Playing WAVE '01_hoge.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
Suspended. Trying resume. Failed. Restarting stream. Done.
サスペンドモジュールを無効にしてみる.
$ sudo vim /etc/pulse/default.pa
# load-module module-suspend-on-idle
なおった.
** シャットダウン時にA stop job is running for [#sc8b63f9]
https://qiita.com/hnw/items/005b2018efaab5f954a9
/etc/systemd/system.conf
DefaultTimeoutStopSec=60s